![]() ![]() Open “Run” box, type “cmd” and hit “Enter” key.Ģ. If SanDisk 64GB Micro SD card won’t format due to its bad sector, you can ask the help of Chdksk utility. Solution 2: Run Chkdsk to check bad sectors Then, you can try to format SD card again. When you see the message that Diskpart attributes cleared successfully, type “exit” to close up this window. Select disk n, n is the number of the SanDisk 64GB Micro SD card. In Diskpart window, type the following commands and hit “Enter” after every command. Enter “Windows +R” at the same time to open “Run” box.ģ. ![]() If you still unable to format the SanDisk SD card, you can clear read-only attribute via Diskpart. If the card reader that you insert the SanDisk 64GB Micro SD has such switch, make sure that it is adjusted to unlock position. Some card readers might be with a physical switch that can be used to lock write protection. If you want to format it, you can remove the write protection. If your SanDisk 64GB Micro SD card is write-protected, you will not be allowed to make any write operation including formatting. Since you have realized the possible factors of SanDisk not formatting, you can predict the specific reasons and take responding solutions listed below: Solution 1: Remove write protection on SanDisk SD card How to solve “SanDisk 64GB Micro SD card unable to format”? How can you format it in File Explorer when you are unable to find out it?īefore finding out proper solutions to fix SanDisk 64GB SD card unable to format, let us realize the possible reasons behind this problem:Virus infection, write-protection, bad sectors, corrupted file system, unsupported file system and physical damage etc. It is also possible that SanDisk 64GB Micro SD card not visible in File Explorer. The error message could be “ Windows was unable to complete the format” or something else. However, when you try to format it, there are chances that you failed to format it, companied by an error message. You might need to format it out of certain reasons like erasing data on it. If it helped you, make sure to share it with others as well.As same as many other kinds of SD card, SanDisk 64GB Micro SD card is a convenient removable storage device. Your problem could be easily solved by executing any of the above methods given below. So, these are the possible methods to fix the SD card not formatting issue. If you cannot use an SD card on your Android device, you can go for other storage options like USB OTG (if supported) as this won’t be using your device’s card slot, which might be causing the read/write problem. Now you should be able to format the memory card from both Android and Windows computers. That’s it you are done! Now type in ‘ exit‘ on the command prompt. In the final step, type in ‘attributes disk clear readonly’ Type in ‘select disk 1’ (replace Disk 1 with the disk number associated with SD card) Select the disk number associated with your SD card. Now you will see the connected storage device. Now on the Command Prompt, type in ‘Diskpart’ and hit enter. To open CMD, click on Start and select CMD. First of all, connect your SD or memory card to the computer and then open CMD. To remove the write protection, you need to use Command Prompt. So, if that was the issue, you need to remove the write protection from the memory card. Well, write protection could be another possible reason behind Android failing to format the SD Card. Windows will now try to format up your SD card, and most probably, it will easily format it. Select the file system as “ FAT32“, and click on the “ Format” button. You will see that the Format windows will pop up on the screen with many options. Right-click on the SD card and select up the option “ Format.” After your SD card is successfully connected to the computer (running Windows), go to My Computer. Just keep in mind that your SD card should appear on the Computer so that you can work on it afterward. Connect your memory card to the PC using a card reader, or connect your smartphone via a USB cable. Just follow some of the simple steps given below. Formatting USB devices or SD cards with a computer is an easy process. If you cannot format the memory card or SD card from Android, then you can try to format it with a computer. Once cleaned, reinsert the memory card and format it. You need to remove the memory card and clean it with a cotton swab or any soft object in such a case. If it’s not reading the memory card, it might be a sign of damage. First, check whether your PC is reading the Memory Card or not. If you are still unable to format your Memory Card after the restart, you need to check the card on a computer/laptop. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |